Switchboard Upgrades Melbourne
Bitz Electrical provides professional switchboard upgrades, fuse board replacements, mains upgrades, and safety switch installations across Melbourne’s north eastern suburbs. We assess your existing switchboard, explain your options clearly, and give you a written quote before any work begins. No variations on the day.
Consistent 5-Star Google Rating
Consistent 5-Star Google Rating
Consistent 5-Star Google Rating

Consistent 5-Star Google Rating
Signs You Need a Switchboard Upgrade
Most Melbourne homes built before the 1990s have switchboards that were never designed to handle the electrical demands of a modern household. Air conditioning, EV chargers, solar inverters, home theatre systems, induction cooktops, and multiple high-draw appliances all put sustained pressure on a system that was built for a simpler time. Some of the clearest signs it is time for an assessment:
- Your switchboard still has ceramic fuses or rewirable fuse wire rather than circuit breakers
- Circuits trip regularly or fuses blow without an obvious cause
- You are adding an EV charger, solar system, air conditioner, or any high-draw appliance
- Your property is being renovated, extended, or converted and the electrical load is increasing
- You notice flickering lights, a burning smell near the board, or discolouration around switches or fuses
- A licensed inspection has flagged your board as non-compliant or inadequate
- Your switchboard has an asbestos backing panel, common in homes built before the mid-1980s
- You are buying or selling a property and want the electrical system properly assessed
If any of these apply, an assessment is worth scheduling before the problem develops into something more serious or more expensive.
Related Services
A switchboard upgrade replaces the board, not the wiring behind your walls. If your wiring is old, fabric-insulated, or aluminium, it can still need attention regardless of how recent your switchboard is. See House Rewiring.
Persistent tripping or flickering isn’t always a switchboard problem. We can track down the source before recommending any work. See Fault Finding.
Still running on ceramic fuses?
Send us a photo of your switchboard and we will tell you what you are dealing with before you commit to anything.
Work We Handle
We handle the full range of switchboard and mains work for residential, commercial, and strata properties across Melbourne's north east.
Full Switchboard Replacement
Complete removal of the existing board and installation of a new switchboard to AS/NZS 3000, fitted with correctly rated circuit breakers and RCDs or RCBOs on every circuit, labelled and tested. Most residential upgrades are completed in a single visit.
Safety Switch Installation (RCD & RCBO)
Ceramic and rewirable fuse boards are the most common type we replace across the north east. Standard in homes from the 1950s to 1980s, they do not trip automatically under fault conditions and are not suitable for modern electrical loads. Replacement is the right solution.
Three-Phase Switchboard Upgrades
Three-phase power is required for large air conditioning systems, commercial kitchen equipment, heavy workshop machinery and some EV chargers. We upgrade the switchboard to correctly support and distribute three-phase supply, and advise on new connections where required.
Consumer Mains Upgrades
The cables from the distributor's supply point to your switchboard have a rated capacity. Adding solar, multiple EV chargers or a three-phase connection may require an upgrade. We manage the process including distributor notification and reconnection as part of the job.
Sub-Board Installation
A sub-board supplies power to a specific area, granny flat, workshop, shed, pool equipment or extension, providing a local distribution point and allowing the area to be isolated independently. Also used in commercial and strata settings for tenancy metering or dedicated circuits.
Surge Protection Device Installation
An SPD installed at the switchboard protects all appliances and electronics from voltage spikes caused by lightning, grid switching or large motor loads. Particularly relevant for properties with solar inverters, home automation, AV equipment or medical devices.
Asbestos Panel Switchboards
Switchboards in Melbourne homes built before the mid-1980s frequently have asbestos cement backing panels. We manage handling, bagging and disposal in accordance with WorkSafe Victoria requirements and include it in the quoted price.
Commercial Switchboard Upgrades
Commercial properties require higher load capacity, compliance with AS/NZS 3000 and industry-specific standards, and coordination with building managers. We carry out commercial switchboard upgrades for offices, warehouses, retail and light industrial sites across the north east.
Switchboard Inspection & Reporting
Not sure if your switchboard needs upgrading? We carry out a full inspection and provide a written report on the condition of your board, what meets current standards, and what requires attention, with no obligation to proceed.
Certificate of Electrical Safety
A Certificate of Electrical Safety is issued for all prescribed switchboard work in Victoria. It is required for insurance purposes, property sales, and building permit sign-off. We issue it on the day the work is completed.
Mains Upgrades and Network Distributor Work
Mains work is an area where many electricians refer out or decline to quote. Bitz Electrical handles it directly. If your property needs its consumer mains upgraded, we manage the full process including the required notification to AusNet Services (the network distributor for Melbourne’s north east), the physical upgrade of the mains cable, and reconnection.
Mains upgrades are required in a number of situations:
- The existing mains cable is undersized for the proposed electrical load
- The cable insulation has deteriorated due to age or UV exposure on the service mast
- Three-phase supply is being introduced to a property currently on single-phase
- The metering arrangement is being reconfigured as part of a solar or battery installation
- The property is being subdivided and a new supply point is required
AusNet Services work, including changes to the service fuse or network connection point, must be coordinated through a licensed electrician with the relevant accreditation. We handle this on your behalf so the job does not stall waiting for distributor involvement.
Why an Outdated Switchboard Is a Risk Worth Taking Seriously
Homes built before the mid-1980s across Melbourne’s north east, particularly the 1960s and 1970s brick veneer stock common in Doncaster, Templestowe, Warrandyte, and Donvale, frequently have asbestos cement switchboard backing panels. This is not an immediate hazard when undisturbed, but it is a reason to use a licensed electrician who understands the handling requirements rather than attempting any DIY work near the board.
The Asbestos Factor in Pre-1985 Melbourne Homes
Old ceramic fuse boards are one of the leading causes of residential electrical fires in Australia. The mechanism is straightforward: ceramic fuses do not trip automatically when a fault occurs. They rely on a fuse wire that melts under excessive load. When that wire blows, the correct response is to replace it with the right rated wire. In practice, many older boards have had incorrect fuse wire installed over the years, sometimes heavier gauge wire that simply will not melt, which removes the only protection the circuit has.
Beyond fire risk, older boards are typically not capable of supporting the sustained loads of a modern household. Running a 6kW reverse-cycle air conditioner, a 7kW EV charger, and an induction cooktop simultaneously on a board designed for a 1970s home creates sustained overloading of wiring inside walls. This heat builds over time and is a hidden hazard that can go undetected for years before causing a fault.
A modern switchboard with appropriately rated circuit breakers and RCBOs on every circuit responds to faults in milliseconds, handles increased electrical loads safely, and gives you the documentation your insurer needs to confirm the property’s electrical system is compliant.
An old fuse board is a risk you can see coming.
Most residential upgrades are done in a single visit. Written quote before we start, no variations on the day.
The Switchboard Upgrade Process
Assessment and Fixed Quote
We assess your existing switchboard, consumer mains, circuit count and type, and any specific requirements such as EV charger or solar capacity. Asbestos is identified at this stage. You receive a fixed, itemised quote covering all work before anything starts.
Distributor Notification
Where mains work or network connection changes are required, we notify AusNet Services and coordinate disconnection and reconnection. This is managed by us — not handed to you as a separate task.
Installation
The old board is removed and the new switchboard installed. Every circuit is connected, labelled and protected with correctly rated devices. Power outage during installation is typically four to eight hours.
Testing and Circuit Verification
Every circuit is tested individually before the board is commissioned — circuit continuity, RCD and RCBO trip times, and correct labelling. Any wiring issues found elsewhere in the property are raised with you before the job is completed.
Handover and Certificate
We walk you through the new board, explain the circuit layout, and confirm how to reset breakers and test safety switches. A Certificate of Electrical Safety is issued on completion — your legal documentation that the work was carried out by a licensed electrician to the required standard.
Why Choose Bitz Electrical for Switchboard Upgrades in Melbourne
- Licensed and insured. All work is carried out by A-grade licensed electricians. Registered Electrical Contractors Licence 31813. Full public liability insurance.
- Over 25 years experience across residential, commercial, and construction electrical work in Melbourne’s north east.
- Mains work handled in-house.We do not refer out consumer mains upgrades or distributor coordination. One electrician, one quote, one visit where the scope allows.
- RCBOs as standard. We install individual RCBOs rather than shared RCDs across multiple circuits, which means a fault on one circuit does not affect others and every circuit has its own protection.
- Written quote before we start.You know the full cost before work begins. No variations on the day, no second invoices.
- Lifetime workmanship guarantee. If anything is ever wrong with our installation, we come back and fix it.
- Certificate of Electrical Safety on every job. Required by law in Victoria, provided as standard.
- Consistent 5-star Google rating. We show up on time, do the work correctly, and leave the site clean.
Ready to Get Your Property Covered?
Tell us about your property and what you want to keep an eye on, and we will recommend a system that fits, with a written quote before anything begins. Most enquiries hear back from us the same day.
Call 1300 215 193or send us a message.
Frequently Asked Questions
What is a switchboard upgrade?
A switchboard upgrade replaces your existing board and its components with a modern unit built to current Australian wiring standards. In most cases this means removing old ceramic fuses or an outdated board and installing new circuit breakers and safety switches, along with a correctly rated main switch and clear circuit labelling. The result is a board that protects your home and the people in it far more effectively than older equipment.
How do i know i need a switchboard upgrade?
Common signs include ceramic or rewireable fuses, a board with no safety switches, breakers that trip often, flickering lights, a burning smell or scorch marks near the board, or a board that is full with no room for new circuits. Homes built before the 1990s often still have original boards that no longer meet current standards. If you are planning solar, an EV charger, air conditioning or a renovation, an upgrade is often needed to support the extra load.
How much does a switchboard upgrade cost?
Cameras should be positioned to cover your own property. Under the Surveillance Devices Act 1999, capturing a neighbour’s private areas, such as windows or backyard, without consent can create both a legal and a relationship problem. We position cameras with this in mind during installation.
How long does a switchboard upgrade take?
A straightforward domestic switchboard upgrade is usually completed within a single day. Larger boards, three phase supplies, asbestos removal or additional rewiring can take longer. We give you a clear timeframe as part of your written quote.
Will my power be off during the upgrade?
Yes. The power needs to be switched off while we work on the board, for safety reasons. We plan the work to keep the outage as short as possible and let you know the expected timeframe in advance so you can prepare.
What are safety switches and does my home need them?
Safety switches, also known as RCDs, cut the power in a fraction of a second when they detect a fault, which helps prevent electric shock and electrical fires. Current standards require safety switches on power and lighting circuits, and we fit them as standard on every board we upgrade. Many older boards have none, which is one of the most common reasons an upgrade is recommended.
Do I need to replace my ceramic fuses?
Ceramic and rewireable fuses are an older technology that offers far less protection than modern circuit breakers and safety switches. They are no longer installed in new work and do not provide the fault protection that current standards call for. Replacing them with modern breakers and RCDs is a core part of most switchboard upgrades.
My switchboard has asbestos. Can you still upgrade it?
Yes. Many boards from the 1960s to the 1980s have asbestos backing panels. We are experienced in handling these safely and arrange for the material to be removed and disposed of correctly before the new board is installed. If asbestos is found during assessment, it is accounted for in your written quote.