Fault Finding Melbourne
Experiencing power outages, tripping safety switches, flickering lights or unexplained electrical faults? Bitz Electrical provides professional electrical fault finding across Melbourne’s north-eastern suburbs, identifying problems quickly and carrying out safe, effective repairs to restore reliability and safety.
Consistent 5-Star Google Rating
Consistent 5-Star Google Rating
Consistent 5-Star Google Rating

Consistent 5-Star Google Rating
Signs You Have an Electrical Fault
Electrical faults rarely announce themselves clearly. More often, they show up as small inconveniences that get reset, reset again, and eventually accepted as normal. None of the following are normal, and all of them are worth having looked at.
Common signs of an underlying fault include:
A safety switch (RCD) that trips repeatedly, especially if it always seems to be the same one
A specific circuit or breaker that trips when certain appliances are used
Lights that flicker or dim briefly when something else switches on, such as the air conditioner or oven
Powerpoints or switches that feel warm, look discoloured, or make a buzzing or crackling sound
A burning smell with no obvious source, particularly near the switchboard
Parts of the house that lose power intermittently for no obvious reason
If a safety switch trips, it has done its job by cutting power before something worse happened. Resetting it without finding out why is the equivalent of ignoring a warning light on a car dashboard. We carry out systematic fault finding to identify the actual cause, whether that is a faulty appliance, a failing connection, degraded insulation, or a wiring fault, and fix it properly.
Electrical Work We Handle on New Builds and Renovations
Safety Switch (RCD) Tripping
Repeated safety switch trips diagnosed circuit by circuit until the faulty circuit or appliance is identified, then repaired properly.
Circuit Overload & Breaker Tripping
Assessing load across your circuits to find out why a breaker keeps tripping, and rebalancing or upgrading circuits where needed.
Flickering & Dimming Lights
Tracing loose connections, neutral faults and shared circuit issues that cause lights to flicker or dim when other appliances switch on.
Intermittent Fault Tracing
Systematic testing to find faults that come and go, rather than only showing up when an electrician happens to be on site.
Thermal Imaging Inspections
Thermal camera inspections of switchboards and wiring to identify hot spots and failing connections before they cause a bigger problem.
Underground & Concealed Cable Faults
Locating faults in underground or in-wall cabling using fault location equipment, so we go to the right spot rather than digging or opening walls unnecessarily.
Safety switch keeps tripping?
Fault callouts are prioritised in our scheduling. Tell us what is happening and we will get back to you quickly.
Why Fault Finding Matters
A fault that trips a safety switch is, in one sense, a good outcome. The safety switch has detected current going somewhere it should not and cut the power before anything worse happened. The problem is what comes next. Resetting the switch and moving on does not fix whatever caused it to trip in the first place, and that underlying cause is often something that gets worse over time rather than better.
Loose connections heat up under load and gradually degrade further with every cycle. Insulation that has been nicked, chewed, or simply aged past its design life continues to deteriorate. A circuit that is overloaded during certain times of day will keep being overloaded until either the load changes or the circuit is upgraded. None of these resolve themselves.
Systematic fault finding means testing methodically until the actual cause is identified, rather than replacing parts on a guess and hoping the problem does not return. Once the cause is confirmed, we provide a written quote for the repair before any work begins.
Fault Finding in Older North East Homes
Homes across Eltham, Montmorency, Greensborough, Ivanhoe, Heidelberg and the surrounding suburbs span a wide range of ages, and the wiring inside them reflects that. Many older properties have been extended or renovated multiple times over several decades, often with new circuits added onto an existing switchboard without much consideration for how the original circuits were laid out. The result can be switchboards with poorly labelled circuits, shared circuits carrying more than they were designed for, and a mix of cable types and ages behind the walls.
This makes fault finding in these homes more involved than in a newer, single-build property, but it is exactly the kind of work we do regularly across the area. We approach it methodically: confirming what each circuit actually carries, checking the condition of older wiring where it is accessible, and testing rather than guessing. Where a switchboard has never been properly labelled, we label it as part of the visit so future fault finding, for you or anyone else, is faster.
How We Work
Contact Us
Call 1300 215 193 or send a message describing what is happening. Fault callouts are prioritised in our scheduling.
On-Site Diagnosis
We test methodically to find the actual cause. If repair work is needed, you receive a written quote before it begins. No variations on the day.
Repair
The fault is fixed at its source, not just patched. Where useful, we label or improve switchboard documentation as part of the visit.
Test and Certify
The repair is tested under normal operating conditions, and you receive a Certificate of Electrical Safety for all prescribed work.
Ready to Get Started?
Tell us about your project and we will come out, assess the work and provide a written quote with no obligation. Most enquiries hear back from us the same day.
Call 1300 215 193or send us a message.
Frequently Asked Questions
Why does my safety switch keep tripping?
A safety switch trips when it detects current leaking to earth somewhere it should not. Common causes include a faulty appliance, moisture in an outdoor circuit, or a deteriorating connection within the wiring. We test each circuit individually to isolate where the leakage is coming from, then repair the cause rather than simply resetting the switch.
What is the difference between Cat5e and Cat6 cabling?
Cat5e supports speeds up to 1Gbps and is adequate for most current uses. Cat6 supports up to 10Gbps over shorter runs and has better crosstalk performance, making it the preferred standard for new installations. If you are running new cabling, Cat6 is worth the marginal additional cost.
Can you run cabling through existing walls?
Yes. Retrofitting cabling into existing homes is routine work. We use flexible rods and wall cavity access techniques to run cabling with minimal wall patching required. We will always discuss the route and any limitations before starting.
How long does a data cabling job take?
A single data point in an accessible location can be completed in under an hour. A whole-home or commercial structured cabling job typically takes one to two days depending on the number of outlets and site complexity. We will give you a realistic timeframe when we quote.
Do you install cabling for CCTV and security cameras?
Yes. We install data and coaxial cabling for IP and analogue CCTV systems as part of our security camera installation service. See our CCTV and security camera page for more detail.