Data and Network Cabling Across Melbourne’s North East

From swapping out old halogen downlights to designing the lighting layout for a full renovation, Bitz Electrical handles lighting installation across Melbourne’s north east. We work with LED, smart and outdoor lighting systems, and every installation is carried out by a licensed A-grade electrician.

Consistent 5-Star Google Rating

Consistent 5-Star Google Rating

Consistent 5-Star Google Rating

Consistent 5-Star Google Rating

Data and Network Cabling Services

Data Point Installation

Single and multiple Cat6 data points for fast, stable wired connections. More reliable and consistently faster than Wi-Fi for workstations, smart TVs and home offices.

Structured Cabling

For commercial fit-outs, renovations and new builds. We design and install systems that consolidate data, voice and network connections into a single organised infrastructure.

Patch Panel Installation

Patch panels bring order to multi-port setups, making connections easier to trace, reconfigure and maintain, as part of a structured cabling solution or a standalone upgrade.

NBN Connection & Integration

We connect and configure premises for the NBN, installing data points, routing cabling neatly through walls and ceilings, and ensuring your installation is compliant and provider-ready.

Wi-Fi Access Point Installation

Hardwired access points rather than range extenders or mesh systems that introduce latency. A cabled access point delivers stronger, more consistent whole-premises coverage.

Home Office & Renovation Cabling

We route Cat6 through existing wall cavities, install flush data outlets and patch through to your router or patch panel, with minimal disruption to your home or renovation.

Need a data point installed or your network sorted?

We assess before we quote, and the quote costs nothing.

Why Cabling Matters

Good network performance starts with the physical layer. Wireless congestion, drop-outs and slow speeds are often a cabling problem, not a device or provider problem. Cat6 cabling supports speeds up to 10Gbps and is the current standard for new residential and commercial installations. Older Cat5e cabling is still common in homes built before 2010 and is worth upgrading if you are renovating or experiencing persistent network issues.

Think your slow connection might be a cabling issue?

We will come out, assess your setup and tell you straight. The visit and quote cost nothing.

What to Expect from Bitz Electrical

Bitz Electrical holds an ACRS open cabling and fibre-optic licence (A038281) in addition to our Registered Electrical Contractors Licence (31813). Jonathan has over 25 years of experience across residential and commercial work, and every data cabling job follows the same process as all our electrical work.

✔     Written quote before work begins. The price does not change once work is underway.

✔     Cabling installed to AS/CA S009 standards.

✔     Neat, concealed runs where possible — no surface-mounted trunking unless agreed.

✔     All outlets tested before we leave.

✔     Lifetime workmanship guarantee on all installations.

Ready to Get Your Property Covered?

Tell us about your property and what you want to keep an eye on, and we will recommend a system that fits, with a written quote before anything begins. Most enquiries hear back from us the same day.

Call 1300 215 193or send us a message.


Frequently Asked Questions

Do I need a licensed cabler for data points?

Yes. In Australia, all structured cabling and data point installation connected to a telecommunications network must be carried out by a registered cabler under the ACMA open cabling registration scheme. Bitz Electrical holds ACRS open cabling licence A038281.

Cat5e supports speeds up to 1Gbps and is adequate for most current uses. Cat6 supports up to 10Gbps over shorter runs and has better crosstalk performance, making it the preferred standard for new installations. If you are running new cabling, Cat6 is worth the marginal additional cost.

Yes. Retrofitting cabling into existing homes is routine work. We use flexible rods and wall cavity access techniques to run cabling with minimal wall patching required. We will always discuss the route and any limitations before starting.

A single data point in an accessible location can be completed in under an hour. A whole-home or commercial structured cabling job typically takes one to two days depending on the number of outlets and site complexity. We will give you a realistic timeframe when we quote.

Yes. We install data and coaxial cabling for IP and analogue CCTV systems as part of our security camera installation service. See our CCTV and security camera page for more detail.

Scroll to Top