Ceiling Fan Installation Across Melbourne’s North East
New ceiling fans installed, old ones replaced, and fans fitted where there has only ever been a light. Bitz Electrical installs indoor, outdoor, DC and smart ceiling fans in homes and businesses across Eltham, Montmorency, Greensborough, Doncaster, Ivanhoe and surrounding suburbs.
Consistent 5-Star Google Rating
Consistent 5-Star Google Rating
Consistent 5-Star Google Rating

Consistent 5-Star Google Rating
Ceiling Work We Handle
New Fan Installation
Fans installed where there is no existing fitting, including running new cabling, fitting the wall control or remote receiver, and mounting to a structural fixing point in the ceiling. In Victoria this is licensed electrical work, not a handyman job.
Replacing a Light with a Fan
One of the most common requests we get. We convert an existing light point to a fan or fan-with-light combination, confirm the ceiling fixing can take the weight and movement of a fan, and upgrade the switching to suit.
Like-for-Like Replacement
Old, noisy or failed fans removed and replaced with a current model. We take the old unit away.
Outdoor & Alfresco Fans
Weather-rated fans for pergolas, verandahs and covered outdoor areas, with appropriately protected cabling and controls. Fan choice matters outdoors, and we will tell you if the model you are considering is not suited to the location.
DC & Smart Fans
Modern DC motor fans use a fraction of the power of older AC models, run quieter, and offer more speeds. We also install fans with app and voice control, and can advise which smart systems are worth having.
Supply & Install, or Install Only
We can supply quality fans from established brands, or install a fan you have already purchased. If you have bought your own, send us the model before the visit and we will confirm it suits the room.
Bought a fan already?
Send us the model and a photo of the ceiling, and we will quote from there.
Choosing the Right Fan
If you have not bought a fan yet, the right choice depends on a few practical factors we assess on every job:
Room size and blade span: Small bedrooms generally suit fans around 120cm. Larger living areas need 130cm or more to move enough air. An undersized fan runs flat out and still disappoints.
Ceiling height: Blades must sit at a safe height above the floor. Standard 2.4m ceilings usually need a low-profile or hugger-style fan, while raked and high ceilings need an extension rod sized to bring the fan down to effective height.
Motor type: DC fans cost more to buy but use far less power, run near silent, and usually include a remote as standard. For a fan running all summer, the difference shows up on the bill.
Winter use: Most quality fans include a reverse function that pushes warm air back down from the ceiling in winter. Used with heating, it makes the room warm faster and lets you run the heater lower.
Lights and controls: Fan-with-light combinations suit rooms where the fan replaces the only light fitting. Controls can be wall-mounted, remote or app-based, and we wire whichever suits how you use the room.
We install fans from established brands and will give you a straight answer on which models hold up and which do not.
Replacing an Old or Failing Fan
Replace your ceiling fan if you notice any of the following:
-
Wobbling that balancing has not fixed, which can indicate a worn mount or bent blades
-
Grinding, clicking or humming from the motor
-
Speeds that no longer work, or a fan that needs a push to start
-
Sparking, burning smells or scorch marks at the fitting
-
An old timber-blade fan installed outdoors, where humidity warps the blades over time
Replacement is usually a quick job when the cabling is sound, and every residential visit includes a free visual safety inspection, so if the switch, cabling or fitting needs attention, you will know before it becomes a problem.
Ceiling Fans in North East Melbourne Homes
Homes across Eltham, Montmorency, Greensborough, Heidelberg and Ivanhoe were largely built between the 1950s and 1980s, before ducted cooling was common, and many still rely on a single split system or evaporative unit. Ceiling fans are the cheapest way to make the rest of the house liveable through summer, and in winter the reverse function helps heating reach further for less.
Older homes bring their own installation questions: ceiling joists that need a proper structural fixing rather than a plasterboard anchor, original light circuits that need checking before they take a fan and light combination, and switchboards without safety switches. We assess all of this before quoting, and where new circuits are required they are RCD protected. You receive a Certificate of Electrical Safety for all prescribed work.
How We Work
Contact Us
Call 1300 215 193 or send us a message. For fan work we can usually quote from the fan model, a photo of the ceiling, and the room dimensions.
Written Quote
You receive a written quote before any work begins. No variations on the day, no additions after the fact.
The Work
Fans mounted to structural fixings, wired to Australian standards, balanced and tested at every speed. Old fans removed and taken away. The room is left clean.
Test and Certify
Everything is tested before we leave, and you receive a Certificate of Electrical Safety for all prescribed work.
Installing fans in more than one room?
Get a written Quote
Call: 1300 215 193
Ready for More Powerpoints, or Safer Ones?
Tell us what you need and we will provide a written quote with no obligation. Most enquiries hear back from us the same day, and every residential visit includes a free electrical safety inspection.
Call 1300 215 193or send us a message.
Frequently Asked Questions
How much does ceiling fan installation cost in Melbourne?
It depends on whether there is an existing fitting, the fan model, the ceiling height and access, and whether the switching or cabling needs upgrading. A like-for-like replacement on sound wiring is the most affordable option, while a first-time installation that needs new cabling, a switch and a structural fixing point costs more. We give you a written quote before any work begins, and the price does not change once work is underway, with no variations on the day. Installing several fans on the same visit reduces the cost per fan.
Do I need a licensed electrician to install a ceiling fan, or can I do it myself?
In Victoria, connecting a ceiling fan to your fixed wiring is prescribed electrical work and must be carried out by a licensed electrician, so it is not a legal DIY or handyman job. Beyond the wiring, a fan needs a structural fixing that can carry its weight and constant movement, which a standard plasterboard light mount was never designed to do. Using a licensed electrician also means you receive a Certificate of Electrical Safety and keep your home insurance and any product warranty intact.
Can you install a fan where there is only a light, or no fitting at all?
Yes to both. Converting an existing light point to a fan or a fan-with-light combination is one of our most common jobs, and we confirm the ceiling fixing can take the weight and movement of a fan, check the circuit, and set up separate control of the fan and light where you want it. Where there is no fitting at all, we run new cabling from a suitable point, fit the switch or remote receiver, and mount to a structural fixing in the ceiling.
What size ceiling fan do I need for my room?
Blade span should match the room. As a rough guide, bedrooms and studies generally suit a fan around 120cm, standard living areas around 130cm, and large open-plan or high-ceilinged rooms 140cm or more, sometimes with two fans in a very long space. An undersized fan has to run flat out and still fails to move enough air, so getting the span right matters more than most people expect. We size the fan to the room when we quote.
How high does my ceiling need to be for a fan?
Yes. Raked and cathedral ceilings are common in north east homes and need a fan rated for the pitch, usually fitted with an angled mount and an extension rod sized to bring the blades down to a safe and effective height. We confirm the fan and downrod suit the angle before installing, so the fan hangs level and clears the slope. Not every fan handles a steep pitch, so send us the model and we will check it first.
Can you install a ceiling fan on a raked, sloped or cathedral ceiling?
Outdoor circuits need RCD protection and appropriately rated, weatherproof fittings and connections. Whether they sit on a dedicated circuit depends on your switchboard and existing circuits, which we assess as part of the quote.
Can you install a ceiling fan in a bathroom, laundry or other wet area?
Yes, provided the fan is rated for the location. Bathrooms and other wet areas are divided into zones under the wiring rules, and the fan must carry a moisture rating suited to the zone it sits in, which a standard indoor fan does not. We select and position a suitably rated fan and protect the wiring accordingly, so it is safe and compliant rather than a corrosion problem waiting to happen.
Are DC ceiling fans worth the extra cost?
Usually, yes. A DC motor fan uses roughly a third of the power of an equivalent AC fan, runs noticeably quieter, offers more speed settings, and typically includes a remote as standard. For a fan that runs through the night all summer, the energy saving is real, though an AC fan is still a sensible choice for a room used only occasionally.
It depends on whether there is an existing fitting, the fan model, the ceiling height and access, and whether the switching or cabling needs upgrading. A like-for-like replacement on sound wiring is the most affordable option, while a first-time installation that needs new cabling, a switch and a structural fixing point costs more. We give you a written quote before any work begins, and the price does not change once work is underway, with no variations on the day. Installing several fans on the same visit reduces the cost per fan.
In Victoria, connecting a ceiling fan to your fixed wiring is prescribed electrical work and must be carried out by a licensed electrician, so it is not a legal DIY or handyman job. Beyond the wiring, a fan needs a structural fixing that can carry its weight and constant movement, which a standard plasterboard light mount was never designed to do. Using a licensed electrician also means you receive a Certificate of Electrical Safety and keep your home insurance and any product warranty intact.
Yes to both. Converting an existing light point to a fan or a fan-with-light combination is one of our most common jobs, and we confirm the ceiling fixing can take the weight and movement of a fan, check the circuit, and set up separate control of the fan and light where you want it. Where there is no fitting at all, we run new cabling from a suitable point, fit the switch or remote receiver, and mount to a structural fixing in the ceiling.
Blade span should match the room. As a rough guide, bedrooms and studies generally suit a fan around 120cm, standard living areas around 130cm, and large open-plan or high-ceilinged rooms 140cm or more, sometimes with two fans in a very long space. An undersized fan has to run flat out and still fails to move enough air, so getting the span right matters more than most people expect. We size the fan to the room when we quote.
Yes. Raked and cathedral ceilings are common in north east homes and need a fan rated for the pitch, usually fitted with an angled mount and an extension rod sized to bring the blades down to a safe and effective height. We confirm the fan and downrod suit the angle before installing, so the fan hangs level and clears the slope. Not every fan handles a steep pitch, so send us the model and we will check it first.
Outdoor circuits need RCD protection and appropriately rated, weatherproof fittings and connections. Whether they sit on a dedicated circuit depends on your switchboard and existing circuits, which we assess as part of the quote.
Yes, provided the fan is rated for the location. Bathrooms and other wet areas are divided into zones under the wiring rules, and the fan must carry a moisture rating suited to the zone it sits in, which a standard indoor fan does not. We select and position a suitably rated fan and protect the wiring accordingly, so it is safe and compliant rather than a corrosion problem waiting to happen.
Usually, yes. A DC motor fan uses roughly a third of the power of an equivalent AC fan, runs noticeably quieter, offers more speed settings, and typically includes a remote as standard. For a fan that runs through the night all summer, the energy saving is real, though an AC fan is still a sensible choice for a room used only occasionally.