Renovations & New Builds

Bitz Electrical handles the full electrical scope on new builds, extensions, and renovations across Melbourne’s north east. From rough-in during framing through to final fix and testing, we work directly with homeowners, builders and project managers to deliver compliant, well-executed electrical installations on time.

Every project gets a written quote before work begins. The price does not change once work is underway, and every installation is backed by a lifetime workmanship guarantee.

Consistent 5-Star Google Rating

Consistent 5-Star Google Rating

Consistent 5-Star Google Rating

Consistent 5-Star Google Rating

Electrical Work We Handle on New Builds and Renovations

Data Point Installation

Single and multiple Cat6 data points for fast, stable wired connections. More reliable and consistently faster than Wi-Fi for workstations, smart TVs and home offices.

Renovation & Extension Electrical Work

Renovations frequently expose older wiring that no longer meets current standards. We assess what can be retained, integrate new work cleanly, and wire extensions to AS/NZS 3000 with appropriate switchboard capacity.

Switchboard Upgrades & Capacity Planning

Older boards with ceramic fuses or insufficient capacity are not suitable for modern loads and will not pass inspection. We upgrade switchboards as part of the project scope with provisions for EV charging, solar and air conditioning.

Lighting Design & Installation

Downlights, pendants, dimmers and external lighting positioned at rough-in stage. Repositioning after plasterboard is costly. We advise early and circuit for maximum flexibility at fit-off.

Power Points, Circuits & Appliance Connections

Power point placement, dedicated circuits for ovens, cooktops and dishwashers, and hard-wired connections for rangehoods and heated towel rails. Circuits planned to AS/NZS 3000 minimum requirements.

Data, Communications & Network Cabling

Rough-in is the right time to run Cat6 data cabling. We install data points, structured cabling to a central patch panel, TV points and access point provisions. Running cabling after plasterboard significantly increases cost.

EV Charger & Solar Provisions

We run conduit and dedicated circuits during construction so EV or solar connections can be made later without opening walls or trenching. A small upfront cost avoids a much larger one down the track.

Safety Switches, Smoke Alarms & Compliance

Safety switches on all circuits and interconnected photoelectric smoke alarms are required on all new and significantly altered installations in Victoria. We ensure compliance with AS/NZS 3000 and the Building Code of Australia.

Planning a renovation or new build in Melbourne's north east?

Get us involved early. The earlier we quote, the smoother the project runs.

Electrical Work in North East Melbourne Homes

The north east has a distinctive mix of housing stock. Brick veneer and weatherboard homes from the 1960s and 70s are common across Eltham, Montmorency, Greensborough and Doncaster, and many still have original wiring and switchboards that need upgrading before renovation work can proceed. Established homes on larger blocks are also increasingly adding extensions, second storeys, and detached studios that require new sub-boards and circuit runs.

We have worked on hundreds of properties across the area and have over 25 years experience. That means fewer surprises on site, realistic timelines, and advice that reflects what we have actually seen in the walls of homes like yours.

What to Expect from Bitz Electrical

Bitz Electrical holds Registered Electrical Contractors Licence 31813 and ACRS open cabling licence A038281. Jonathan has over 25 years of experience across residential and commercial projects in Melbourne’s north east, including full new build fitouts, whole-home rewires, and staged renovation projects. Every job follows the same process.

✔ Written quote before work begins. The price does not change once work is underway.
✔ All work completed to AS/NZS 3000 Wiring Rules.
✔ Certificate of Electrical Safety issued on completion of all prescribed work.
✔ We coordinate with your builder, tiler, and other trades to avoid delays.
✔ Site left clean at the end of each visit.
✔ Lifetime workmanship guarantee on all installations.

Over 25 years experience working on homes and businesses across Melbourne.

Licensed, insured, and backed by a lifetime workmanship guarantee.

How We Work

Contact Us

Call 1300 215 193 or send us your plans and project details. For new builds and renovations, the earlier you get us involved the better. We can advise on cable routes, switchboard sizing and future provisions before construction starts.

Written Quote

We assess the site or review your plans and provide a written quote covering the full scope of electrical work. The price is fixed from the day of quoting. No variations, no additions on the day.

The Work

We work to your construction programme, attending for rough-in, fit-off and any intermediate stages as required. We coordinate with your builder and other trades and communicate proactively if anything on site affects the scope or timeline.

Test, Certify and Handover

All circuits tested before handover and the site left clean. You receive your Certificate of Electrical Safety for all prescribed work — the documentation required for building permit sign-off and future reference.

Frequently Asked Questions

Do I need a licensed cabler for data points?

Yes. In Australia, all structured cabling and data point installation connected to a telecommunications network must be carried out by a registered cabler under the ACMA open cabling registration scheme. Bitz Electrical holds ACRS open cabling licence A038281.

Cat5e supports speeds up to 1Gbps and is adequate for most current uses. Cat6 supports up to 10Gbps over shorter runs and has better crosstalk performance, making it the preferred standard for new installations. If you are running new cabling, Cat6 is worth the marginal additional cost.

Yes. Retrofitting cabling into existing homes is routine work. We use flexible rods and wall cavity access techniques to run cabling with minimal wall patching required. We will always discuss the route and any limitations before starting.

A single data point in an accessible location can be completed in under an hour. A whole-home or commercial structured cabling job typically takes one to two days depending on the number of outlets and site complexity. We will give you a realistic timeframe when we quote.

Yes. We install data and coaxial cabling for IP and analogue CCTV systems as part of our security camera installation service. See our CCTV and security camera page for more detail.

Ready to Get Started?

Tell us about your project and we will come out, assess the work and provide a written quote with no obligation. Most enquiries hear back from us the same day.

Call 1300 215 193or send us a message.


Scroll to Top